• SorteKanin@feddit.dk
    link
    fedilink
    arrow-up
    125
    arrow-down
    1
    ·
    7 months ago

    Most users are in US or western Europe timezones I would guess.

    Although you could say the whole planet has a bit of a heart beat. Surely there are fewer people awake when the Pacific ocean faces the sun?

    • Phillmebucket@lemmy.ca
      link
      fedilink
      arrow-up
      25
      arrow-down
      2
      ·
      7 months ago

      My guess would be this is one of the few major bots that ramp up its posting during Prime Times. I’ve been trying to use the fediversee for almost a year now and I check post multiple times a day, everyday. The vast, and I mean upwards of 90% or more of the post in my feed are just repost bots from Reddit or news aggregator bots. I’d be surprised if more than 10% of the post generated come from actual humans. I’m sure some of the server owners could give us much more insight on this with post by IP statistics. But my guest regardless is human interaction is pretty low.

      • Blaze@reddthat.com
        link
        fedilink
        arrow-up
        14
        arrow-down
        1
        ·
        7 months ago

        I’d be surprised if more than 10% of the post generated come from actual humans.

        I have the opposite impression, that’s interesting

        • moosetwin@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          2
          ·
          7 months ago

          If you check posts that have low upvote amounts, (say 0 - 20) you are more likely to see this phenomenon, especially in the technology communities.

      • teft@lemmy.world
        link
        fedilink
        arrow-up
        41
        ·
        7 months ago

        Turn off bots in your profile and then ban the two or three bots that aren’t marked as bots and your feed will improve immensely. I forget that there even are bots on this site until someone mentions it in a comment.

      • SorteKanin@feddit.dk
        link
        fedilink
        arrow-up
        14
        ·
        7 months ago

        You can just block bot users when you see them. In my experience, it’s not a big problem.

    • Appoxo@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      12
      ·
      7 months ago

      Definitely a high presence of US users and the occassional (western) European among all.
      Most of the times they represent themselve through their instance.

      But it’s the same as with Reddit: Mentioning a thing without mentioning a country = US.

      • Jourei@lemm.ee
        link
        fedilink
        English
        arrow-up
        13
        arrow-down
        2
        ·
        7 months ago

        Ah, my favorite way of trolling when I felt like it. Dispute something and eventually go “Ah, sorry didn’t know you were US specific with this” when I finally learn the revelation.

  • jws_shadotak@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    94
    ·
    edit-2
    7 months ago

    Based on that EKG, the fediverse is in some sort of v-tach and blood is not pumping efficiently enough to have a pulse

      • FridaG@lemmy.world
        link
        fedilink
        arrow-up
        5
        arrow-down
        12
        ·
        7 months ago

        Nah. Defibrillators use direct current. Unless they are covered in salt water, there is no reason for the electricity to go anywhere other than in a relatively straight line

        • Zoot@reddthat.com
          link
          fedilink
          arrow-up
          2
          ·
          7 months ago

          Electricity doesn’t immediately know where to go. It is true that it will always take the shortest path to ground, as soon as it finds that route. This is extremely simplified.

          • aubeynarf@lemmynsfw.com
            link
            fedilink
            arrow-up
            1
            ·
            7 months ago

            What? No. Electricity takes all conductive paths through a circuit simultaneously, with a current in inverse proportion to the path resistance. Ground means nothing unless it somehow makes up a part of the circuit - it is neither a “sink” nor “zero” for electricity. It’s just dirt.

            • Zoot@reddthat.com
              link
              fedilink
              arrow-up
              1
              ·
              edit-2
              7 months ago

              Electricity always needs somewhere to go. Generally you can refer to where it goes, as a “Ground” I said “This is extremely simplified” for a reason.

              I don’t actually understand what you’re trying to say, all I was saying is that Electricity is indeed going to take all possible paths, until it finds the one with the least resistance, which is what I believe you said just in a different way. You are a part of that circuit for a very miniscule, brief second, upon adding yourself (touch).

              • aubeynarf@lemmynsfw.com
                link
                fedilink
                arrow-up
                1
                ·
                edit-2
                7 months ago

                A battery (or transformer secondary) has two terminals - neither is “ground”, and electricity will flow between them if a circuit is formed.

                Often, one terminal of a battery or transformer is connected to a ground stake, so it’s possible for ground to become part of the circuit. But ground is not any kind of natural destination for electricity. (Other than lightning, which is a result of a charge forming between the earth and the clouds)

                it doesn’t “find” the path of least resistance. It takes (flows along) all possible paths simultaneously. If you connect two wires in parallel between the terminals of a battery, one of which is thick (resistance) and one of which is thin (high resistance), current will flow along both.

        • BoscoBear@lemmy.sdf.org
          link
          fedilink
          arrow-up
          15
          ·
          7 months ago

          If you have two resistors in parallel the current doesn’t just flow through one resistor. You will get shocked. That’s why you yell “clear” before juicing them.

          • FridaG@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            7 months ago

            No. You yell clear before defibrillation because of hypothetical risk. The likelihood that a person actually received a significant shock is tremendously low, and even lower if they are wearing gloves.

            As a side note, you do not yell clear before juicing them. You charge the defibrillator while continuing to give cpr, and then once it is charged, you clear, analyse the rhythm, and if it is shockable, ensure everyone is clear and deliver the shock. This protocol is to minimise the amount of time the arrested patient goes without chest compressions.

      • CarbonatedPastaSauce@lemmy.world
        link
        fedilink
        English
        arrow-up
        10
        arrow-down
        1
        ·
        7 months ago

        I always wondered what they use for ground when they are zapping people. Does it just go to the bed frame and out the ground wire the bed is plugged into?

        • GorgeousWalrus@feddit.de
          link
          fedilink
          arrow-up
          5
          ·
          edit-2
          7 months ago

          There is no „ground“ in that sense. For a current to flow, you have to create a connection between the source anode and kathode (e.g. + and - of a battery).

          You can think of the defibrillator as a battery with a very small but powerful charge. You close the circle by touching both pads to the body. The current will flow through one pad into the body, through the heart and „restart“ it and from there into the other pad. No current leaves this system (=goes into „ground“), it goes back into the defibrillator where the loop is closed.

          Why do you get a shock from touching a power cable then, you ask? Without touching another pole and thereby closing the circle? (Note: power cables are AC but for simplification, above DC example can be applied)

          This is because for our power stations, the ground is acting as a pole, the current can flow through the ground back to it and thereby close the loop. Therefore, you can reduce the risk of a shock by using boots with thick rubber soles - the rubber acts as an insulator.

          Btw, „ground“ is an often misunderstood term. Voltage is the difference between the electric potential of two points in a system. What is often called ground, is the common reference potential.

          As powerlines use the actual ground as reference potential, „ground“ has become the defacto name for that - but it’s just a point of reference and can be of any potential. I could measure a voltage (=difference) between the ground of two different systems

  • PrinceWith999Enemies@lemmy.world
    link
    fedilink
    arrow-up
    2
    arrow-down
    4
    ·
    7 months ago

    This is seasonality.

    Seasonality is a characteristic of a time series and refers to periodic and generally regular and predictable changes that occur over a year.

    To make it more generic, drop the “over a year” and just refer to the periodic signal over time idea. You can find additional signals by how you bin the data, eg monthly or day of week.

    • The Octonaut@mander.xyz
      link
      fedilink
      arrow-up
      3
      arrow-down
      1
      ·
      7 months ago

      Seasonality specifically refers to periodic signals over the course of a year. Any other interval means it’s not seasonality. You can read that yourself in the definition you quoted.

      • PrinceWith999Enemies@lemmy.world
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        7 months ago

        I do this for a living. Seasonality as a generic term refers to temporally periodic signals but can even be extended to talk about non-temporal aspects of a signal. The same math used in areas like econometrics to remove periodicity in annual data can be applied to multiple domains. The main motivation to removing or isolating periodicity is to allow for investigation into the underlying phenomena, or to allow the investigation of the sources of periodicity independently of other drivers. In every case, though, seasonality is an acceptable term in everything I’ve written, read, and worked on.