Its currently got 16 disks, and a ZigBee. So not a lot from my point of view.
However its also got the internal hubs to split the front and back ports, I think the Bluetooth is hooked up to USB on the board and there are a few other things that appear as codes. What it means is that trying to connect another disk to swap out on my ZFS fails to enumerate on the USB. I dont think the number of items are unreasonable but this little box wasn’t quite designed for this usecase.
[Edit] As mentioned on the other thread, these only have 50 endpoints because Intel, and each device is 2 endpoints so there are only 20 devices total that can be plugged in.
I’ve tried to respond to everyone who have given their opinion of my set up in a top level comment to try and keep it on topic.
You can respond there if you feel like you have anything to add.
I would strongly look into proper SAS or Sata. USB is not designed for what you are doing. Also writing a long comment comment about how you have been in tech for decades does not make your setup any less crazy. I can not understate that a standard setup would be way better.
I’ve tried to respond to everyone who have given their opinion of my set up in a top level comment to try and keep it on topic.
You can respond there if you feel like you have anything to add.
You currently have 16 disks connected via USB, in a ZFS array?
I highly recommend reimagining your path forward. Define your needs (sounds like a high-capacity storage server to me), define your constraints (e.g. cost), then develop a solution to best meet them.
Even if you are trying to build one on the cheap with a high Wife Acceptance Factor, there are better ways to do so than attaching 16+ USB disks to a thin client.
I’ve tried to respond to everyone who have given their opinion of my set up in a top level comment to try and keep it on topic.
You can respond there if you feel like you have anything to add.
I have to ask, even though I’m afraid of the answer, exactly how many USB storage devices are you (planning on) hooking up to that poor machine?
Its currently got 16 disks, and a ZigBee. So not a lot from my point of view.
However its also got the internal hubs to split the front and back ports, I think the Bluetooth is hooked up to USB on the board and there are a few other things that appear as codes. What it means is that trying to connect another disk to swap out on my ZFS fails to enumerate on the USB. I dont think the number of items are unreasonable but this little box wasn’t quite designed for this usecase.
[Edit] As mentioned on the other thread, these only have 50 endpoints because Intel, and each device is 2 endpoints so there are only 20 devices total that can be plugged in.
Oh my do not do this USB can be very fragile and you array might just implode one day.
Go get yourself 2-3 servers and then load them each with some drives. From there setup Ceph and profit.
That sounds absolutely gross.
I’ve tried to respond to everyone who have given their opinion of my set up in a top level comment to try and keep it on topic. You can respond there if you feel like you have anything to add.
https://feddit.uk/post/21088443/13862900
Your setup is definitely “non standard”
I would strongly look into proper SAS or Sata. USB is not designed for what you are doing. Also writing a long comment comment about how you have been in tech for decades does not make your setup any less crazy. I can not understate that a standard setup would be way better.
I did ru my nas over USB for 20 years. Never had an issue. But I never had more than 6 USB drives and 2 or 3 USB network Ethernet card tough.
All with Linux software raid.
Switched to a full desktop case and now enjoying internal sata.
Why not sata or nvme drives?
I’ve tried to respond to everyone who have given their opinion of my set up in a top level comment to try and keep it on topic. You can respond there if you feel like you have anything to add.
https://feddit.uk/post/21088443/13862900
Thanks, that’s a great write up
You currently have 16 disks connected via USB, in a ZFS array?
I highly recommend reimagining your path forward. Define your needs (sounds like a high-capacity storage server to me), define your constraints (e.g. cost), then develop a solution to best meet them.
Even if you are trying to build one on the cheap with a high Wife Acceptance Factor, there are better ways to do so than attaching 16+ USB disks to a thin client.
I’ve tried to respond to everyone who have given their opinion of my set up in a top level comment to try and keep it on topic. You can respond there if you feel like you have anything to add.
https://feddit.uk/post/21088443/13862900
This is like the epitome of the XY Problem.
https://xyproblem.info/