There are a lot of reasons not to give them your money. They’re assholes to the maker community and they openly talk shit on a lot of their customer base. That’s beside the point, though, really.
It’s just not a spectacular option for hosting. In order to get a Rpi competitive with even the shittiest laptop from 7 years ago, you’re going to end up spending more than you would spend on a decent laptop from 7 years ago.
If it is a computer that turns on, it will likely function orders of magnitude better than an Rpi and won’t bind you to ARM architecture. My entire hosting setup was pulled out of a recycling pile for free. Install ubuntu/ubuntu server and enjoy yourself.
If you intend on spending any amount of money on this hobby, I cannot express enough how much I recommend against any of that money going toward a Raspberry Pi.
EDIT: A lot of you seem to be reading this as “Raspberry Pis are all nonfunctional” and getting mad about it. Don’t do that.
Edit 2: Good to see that all the stupid parts of reddit made it here
You seem to have conveniently left out power consumption.
I agree they are very pricey these days. Are there any competitiors that offer cheap low-power consumption computers?
You’d probably be shocked at how close a 65w supply charging a laptop battery at trickle voltages and a 2A 5v power supply maxed out 24/7 can come to each other
Do you have some source for that?
I can’t see an old laptop running 24/7 as being close to a raspberry pi performing the same tasks.
P=V x I
65W ≠ 5V x 2A
An RPi doesn’t max out a 2A 5V power supply unless its under heavy load. Idle is closer to half an amp.
If you’re hosting a server, you’re not going to get much idle time.
What about a web server or a file server? Both are very much on-demand, so they’re chock full of idle time. Even NextCloud has a ton of idle time.
Edit: As an aside, I love your profile pic, it’s a cool wizard :)
Thank you! A tiktok follower who is a tattoo artist surprised me with a drawing of me with some toads and I’ve loved it more with each passing day
Heavily depends on the server, a game server sure, for almost anything else you’re probably doing it wrong.
Ok
Yeah, power consumption is never talked about enough when talking about that type of hardware. I do have an old PC I could use as a server, but I don’t need more heating at home. Mini-PCs are cool, but how cool are they?
But anyway, I haven’t been able to buy a RPi at decent price in years, so 🤷🏻♂️
You can use a thin client PC, which is usually uses <10 watt. Pi is even lower though, usually <5 watt.
deleted by creator
It will not be that great like on Raspberry Pi, but Mini PC are also very low on energy. For example,. Wyse 5070 with J5005 idles around 3-5 W, which is really great. i had HP 800 Mini G3 that idled ~7-8W. Mini PCs are more powerful, expandable and can use normal SSD Drive. For selfhosting they are better, but in some places Raspberry Pi (or alternative like Orange Pi) will be better, especially when you need something small and really low power
I never heard of the orange pi!
Some of the models are very cheap. Have you tried them? If they are as reliable, I might get myself one for a couple of projects.
I got an 1 gig Orange pi zero 2 with a 2 port USB expansion board. I got it from ali express with a 32gigabyte micro SD card, USB to USBC charging cable for like $40.
I 3d printed a case for it. Provisioned it with a heatsink, fan, 18W USB power supply, and a UPS.
I use it as an octoprint server, the extra USB ports go to a webcam and a fan if i feel like it. It’s been reliable but I’ve only had it a month. Transferring jobs is nearly instant plugged into gigabit ethernet. Transfer is via API key not web interface. Seems to do alright in the CPU department. It has to parse some of the larger jobs for a minute.
Prints perfectly. Only had one resent packet USB packet so far. After it prints rendering out 1080P time-lapses was slow. It would hit like 70% cpu usage and take hours. Rendering out 1080P octolapses with fewer frames and less movement would hit 98% cpu use but be done very fast - like 10 min.
They just announced an orange pi zero 3 with a similar form factor (but not exactly the same) and larger faster memory.
I tried one ~5-10 years ago and the idea was good but it didn’t have nearly the level of support that Raspis have.
Do you mean hardware-wise, or software?
A little bit of both IIRC.
It used a different chipset than the raspberry so it needed a tweaked version of Raspbian to run but the drivers weren’t great and the repos were missing a lot of stuff/outdated.
Ah thanks!
Yeah that’s gonna be tricky for me then… I really don’t like to deal with driver headaches.
I’ve definitely also had the experience of dodgy hardware support (in Armbian, which is all volunteer) with weird Chinese SBCs.
Yes. I have Orange Pi Zero 2 with 1 GB of RAM running Ubuntu. This is actually very powerful machine, more powerful than my Raspberry Pi 3B+. i bought it for about 180 polish zloty (around 40 euros). I use it for printing server with Ghostscript printer app installed via Snap. I also tried Wireguard and MongoDB - everything works fine. it works really well, but it sits around 50 C on CPU, so it can get hot.
I had some good experience with the pine64 boards!
Oh never looked into those, thanks!
I wanted to get something to use as a NAS server and/or a pi-hole.
Sure, yw :) There are also NAS cases for some of the SBCs, but I guess you can also go cheaper without a dedicated case and go with some icybox which allows you to connect some disks (jbod or RAID) via USB 3. So many possibilities!
I’ve been happy with the libre computer LePotato. It’s similar to a pi board.
I thought you were joking, it’s actually the real name. xD
Removed by mod
I use a thin client (Futro S740 with J4125 CPU). Far more powerful than a PI4, same-ish power consumption, I don’t have a device that can do sub-10W measurements, but there are measurements from other users.
Refurbished thin clients are absolutely amazing for consumption-conscious home servers, I paid <$40 for the device and <$100 for all my hardware combined (2 SSDs, 8 GB RAM, m2 adapter).
Pi’s are amazing, but unless you need the GPIOs or the size, there are better options for servers.