I’ve posted a few days ago, asking how to setup my storage for Proxmox on my Lenovo M90q, which I since then settled. Or so I thought. The Lenovo has space for two NVME and one SATA SSD.
There seems to a general consensus, that you shouldn’t use consumer SSDs (even NAS SSDs like WD Red) for ZFS, since there will be lots of writes which in turn will wear out the SSD fast.
Some conflicting information is out there with some saying it’s fine and a few GB writes per day is okay and others warning of several TBs writes per day.
I plan on using Proxmox as a hypervisor for homelab use with one or two VMs runnning Docker, Nextcloud, Jellyfin, Arr-Stack, TubeArchivist, PiHole and such. All static data (files, videos, music) will not be stored on ZFS, just the VM images themselves.
I did some research and found a few SSDs with good write endurance (see table below) and settled on two WD Red SN700 2TB in a ZFS Mirror. Those drives have 2500TBW. For file storage, I’ll just use a Samsung 870EVO with 4TB and 2400TBW.
| SSD | TB | TBW | € |
|---|---|---|---|
| 980 PRO | 1TB | 600 | 68 |
| 2TB | 1200 | 128 | |
| SN 700 | 500GB | 1000 | 48 |
| 1TB | 2000 | 70 | |
| 2TB | 2500 | 141 | |
| 870 EVO | 2TB | 1200 | 117 |
| 4TB | 2400 | 216 | |
| SA 500 | 2TB | 1300 | 137 |
| 4TB | 2500 | 325 |
Is that good enough? Would you rather recommend enterprise grade SSDs? And if so, which ones would you recommend, that are m.2 NVME? Or should I just stick with ext4 as a file system, loosing data security and the ability for snapshots?
I’d love to hear your thought’s about this, thanks!
You must log in or register to comment.
Don’t sweat it.
I remember looking into this as well like a year ago. I also found the same info and started to look into ssds, consumer and enterprise grade and after all that I realised that most of it is just useless fuzzing about. Yes it is an interesting rabbit hole in which I spent a week probably. In the end one simple thing nullifies most of this: you can track writes per day and SSD health. It is not like you need to somehow made a guess when the drives fail. You do not. Keep track of the health and writes per day and you will get a good sense of how your system behaves. Run that for 6 months and you are infinitely wiser when it comes to this stuff.
That rabbit hole is interesting, but also deep and scary. I’m trying to challenge myself by setting up Proxmox, as so far I’ve just used Raspbery Pis as well as OpenMediaVault. So when I saw those stories about drives dying after 6 months, I was a bit concerned;. Especially because I can’t yet verify the truth in those storries, since I’d call myself and advanced novice if I’, being generous.
I’ll track drive usage and wear and see what my system does. Good point, then I can get rid of the guesswork. Thank you a lot!
Good luck!
I’ll agree with the other commenter here.
Also there may not be any difference between the consumer and enterprise drives. The reason the enterprise cost more is the better warranty. But because they have different components.
Monitor the drives, modern drives are pretty good at predicting when they are dying, and replace it necessary.
Yeah, concering TBW there wasn’t a huge difference between cosumer- and enterprise drives that I saw. Something along 2500TBW vs. 3500TBW (unless you go with those unaffordable drives, then yes). I’ll monitor the drives and if I find rapidly increasing wear, I can still switch to another file system. The whole reason I bought the Lenovo is to setup a second machine and experiment, while I still have a running “production” system. Thank you!
ZFS doesn’t eat your SSD endurance. If anything it is the best option since you can enable ZSTD compression for smaller reads/writes and reads will often come from the RAM-based ARC cache instead of your SSDs. ZFS is also practically allergic to rewriting data that already exists in the pool, so once something is written it should never cost a write again - especially if you’re using OpenZFS 2.2 or above which has reflinking.
My guess is you were reading about SLOG devices, which do need heavier endurance as they replicate every write coming into your HDD array (every synchronous write, anyway). SLOG devices are only useful in HDD pools, and even then they’re not a must-have.
IMO just throw in whatever is cheapest or has your desired performance. Modern SSD write endurance is way better than it used to be and even if you somehow use it all up after a decade, the money you save by buying a cheaper one will pay for the replacement.
I would also recommend using ZFS or BTRFS on the data drive, even without redundancy. These filesystems store checksums of all data so you know if anything has bitrot when you scrub it. XFS/Ext4/etc store your data but they have no idea if it’s still good or not.
Thank you so much for this explanation. I am just a beginner, so those horror stories did scare me a bit. I also read, that you can fine tune ZFS to prevent write amplification so I’ll read into that subject a bit more.
I thought ZFS without redundancy did give no benefits, but I most have gotten that wrong. Thanks again!
ZFS without redundancy is not great in the sense that redundancy is ideal in all scenarios, but it’s still a modern filesystem with a lot of good features, just like BTRFS. The main problem will be that it can detect data corruption but not heal it automatically. Transparent compression, snapshotting, data checksums, copy-on-write (power loss resiliency), and reflinking are modern features of both ZFS/BTRFS, and BTRFS additionally offers offline-deduplication, meaning you can deduplicate any data block that exists twice in your pool without incurring the massive resources that ZFS deduplication requires. ZFS is the more mature of the two, and I would use that if you’ve already got ZFS tooling set up on your machine.
Note that the TrueNAS forums spread a lot of FUD about ZFS, but ZFS without redundancy is ok. I would take anything alarmist from there with a grain of salt. BTRFS and ZFS both store 2 copies of all metadata by default, so bitrot will be auto-healed on a filesystem level when it’s read or scrubbed.
Edit: As for write amplification, just use
ashift=12and don’t worry too much about it.Where can I read more about good ZFS settings for a filesystem on a new RAID6 array? I don’t want to manage disks or volumes with ZFS, I’ll be doing that with mdadm, just want ZFS as filesystem instead of ext4. I assume a ZFS filesystem can grow if the space available expands later?
ZFS can grow if it has extra space on the disk. The obvious answer is that you should really be using RAIDZ2 instead if you are going with ZFS, but I assume you don’t like the inflexibility of RAIDZ resizing. RAIDZ expansion has been merged into OpenZFS, but it will probably take a year or so to actually land in the next release. RAIDZ2 could still be an option if you aren’t planning on growing before it lands. I don’t have much experience with mdadm, but my guess is that with mdadm+ZFS, features like self-healing won’t work because ZFS isn’t aware of the RAID at a low-level. I would expect it to be slightly janky in a lot of ways compared to RAIDZ, and if you still want to try it you may become the foremost expert on the combination.
I assume you don’t like the inflexibility of RAIDZ resizing
Right, I’d like to be able to add another disk and then grow the filesystem and be done with it.
my guess is that with mdadm+ZFS, features like self-healing won’t work because ZFS isn’t aware of the RAID at a low-level
Really, I’ll have to look into that then because health checks are my main reason for using ZFS over ext4.
mdadm RAID should be a transparent layer for ZFS, it manages the array and exposes a raw storage device. Not sure why ZFS would not like that but I don’t want to experiment if it’s not a reliable combination. I was under the impression that ZFS as a filesystem can be used without caring about the underlying disk support, but if it’s too opinionated and requires its own disk management then too bad…
The main problem with self-healing is that ZFS needs to have access to two copies of data, usually solved by having 2+ disks. When you expose an mdadm device ZFS will only perceive one disk and one copy of data, so it won’t try to store 2 copies of data anywhere. Underneath, mdadm will be storing the two copies of data, so any healing would need to be handled by mdadm directly instead. ZFS normally auto-heals when it reads data and when it scrubs, but in this setup mdadm would need to start the healing process through whatever measures it has (probably just scrubbing?)
Today, growing a pool is possible by adding a vdev, right?
So, instead of RAIDZ2, one could setup their pool with mirrored vdevs.
However, I’m not sure about the self-healing part. Would it still work with mirrored vdevs, especially when my vdevs consist of two physical drives only?
I’m kinda repeating things already said here, but there’s a couple of points I wanted to highlight…
Monitor the SMART health: Enterprize and consumer drives fail, it’s good to know in advance.
Plan for failure: something will go wrong… might be a drive failure, might be you wiping it by accident… just do backups.
Use redundancy; several cheapo rubbish drives in a RAID / ZFS / BTRFS pool are always better than 1 “good” drive on it’s own.
Main point: build something and destroy it to see what happens, before you build your “final” setup - experience is always better than theory.
I built my own NAS and was going with ZFS until I fkd around with it… for me… I then went with BTRFS because of my skills, tools I use, etc… BTRFS just made more sense to me… so I know I can repair it.
And test your backups 🎃
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters NAS Network-Attached Storage RAID Redundant Array of Independent Disks for mass storage SSD Solid State Drive mass storage
3 acronyms in this thread; the most compressed thread commented on today has 4 acronyms.
[Thread #259 for this sub, first seen 2nd Nov 2023, 14:30] [FAQ] [Full list] [Contact] [Source code]
