Mine runs at 30watts at idle.
That powers 4 switches, 1AP, and my proxmox system (framework laptop motherboard) which runs my router and my services.
What is everyone else’s usage and what does it power?
You must log in or register to comment.
My rack looks to pull about 325-350W. I need to downgrade my main server, as it’s a bit overkill as a decommed proliant. Need to figure out a high ram nuc as a replacement
< 10W, I’m guessing my router, modem and WiFi AP take more power than the PI4 with 1 SSD and J4125 with 2 SSDs
Yep. Same hahah.
And I am even using my Pi4 as an Access Point too execpt nexcloud jellyfin kavita piholenpivpn etc
Mine is ~300w @ 230v most of the day. It varies only on what is being used.
when power fails and i have to switch to generator, the servers stay about the same but I can add about 250w to that for my PC, modem(nbn) etc . (which is why i know this info!)
Same as you. Old AMD system with a Ryzen 2400, three hard drives and two ssds running open Media vault. The hard drives spin down after 30 minutes, as I only use them once or twice a day.
About 150 watts:
- Qotum i3 4 port mini pc pfSense firewall
- TP-Link 24 port managed switch
- Shuttle DH110 SFF PC running Proxmox with Coral TPU running a Home Assistant OS VM with the Coral passed through for Frigate and an Ubuntu VM running Jellyfin, *arr stack and other media stuff
- Lenovo m910q running Proxmox and a bunch of VMs for docker and testing stuff (RHEL, Debian 11, Windows 10 Enterprise N)
- HP ProDesk 400 SFF running Proxmox with a Debian 11 VM that is my “daily driver” OS
- An ancient AMD FrankenPC cobbled together from old parts that runs Ubuntu 20.04 baremetal and exists only to house a few IronWolf drives totalling about 24TB.
All of the systems except for the firewall and fileserver have i7-6700T CPUs - 4 cores, 8 threads, 35 watts. Nice chips!
deleted by creator
Why are you asking, did my wife get you to ask?
But around 300w with 24 port switch, dish shelf (3.5" disks) and server with ssd’s and 2.5" disks
I feel for those in Europe, these are the current spot prices in NZ
Edit corrected image:
I approve of the y-axis label. But everything else is kinda missing… Like the information what’s depicted on the diagram. Cost of production? Price for a end-user? pre- or after tax? which country? and why did someone paint in 5 different colors? It certainly doesn’t match what i’m paying.
From New Zealand and is averaged wholesale spot prices for the 5 (main) produces here
Ah okay. Makes sense. Didn’t know that. And New Zealand has cheap electricity because of big hydroelectric plants and geothermal energy? Or is that a political decision like it is subsidized by the government by taking little taxes on energy?
Mostly hydro, It would probably be even cheaper if we didn’t subsidise big aussie firms to smelter aluminium here
I pay 0.7 EUR/kWh though it’s capped at 0.4 EUR/kWh at the moment. Which is why I make net half of my power myself. At some 1 EUR/Wp it pays off really quickly.
About 45W for my router, fiber endpoint, switch, three wireless APs and a Pi4 running Home Assistant. I’ve got a synology running separately that I suspect uses more, but I haven’t measured it recently. Thinking about putting the synology in the crawlspace as it’s kinda loud.
My Grafana dashboard says 81 watts at the moment. This includes a slightly beefy Intel computer running Proxmox, with a Kubernetes cluster inside, a few other small ARM servers, and my networking stack which is a router, 1 switch, 1 AP, and a modem. Also the main server is full of spinning rust disks. I haven’t done much to optimize power consumption.
I think I’m at 225 watts.
HP ProLiant us using 125 to 150 mostly, synology nas that consumes about 30, and I think the ubiquity stuff takes about 75 watts
I’ve got:
R720 w/ 2697v2s, 12 hdds Some Intel 2011 box w/ 2667v2s A custom AM5 server w/ 7700x, 8 hdds An old Cisco enterprise 48 port (&4 SFP+) switch It seems to hover ~800w.
I’m looking into replacing a lot of it especially the Intel server because it’s used for just pfSense.Dual Xeon 2640v3, Quadro P2000, 6 mechanical HDDs, 5 SSDs, 8 port LSI HBA.
How did you get that graph
Looks like a graph from a power meter displayed in Home Assistant to me.
Asrock X300 Mini with 2x HDD 2 TB 2,5" drives in Raid1, NVMe Samsung, 1 TB 2,5" HDD connected via USB and Zigbee gateway
100W or so.
- ISP Fiber ONT
- Opnsense box (Optiplex SFF, i5-4570)
- 24 port switch
- Server (HP MT, i5-7500) with 2x SSD, 2x SAS HDD
- Server (Moderro IEC-4660, i3-7100u) with SSD, 2x USB HDD for backups
25w pc with 3 SSDs and idk how much w for rpi running 2nd pihole
