Hi Lemmy Community,

At the moment i got a router-modem-combination from my ip and i want to be more independent. Therefore i want to use the provided hardware as bridge and buy my own router to manage my network.

In my home network i got

  • 2 Desktop PCs (cable)
  • 1 Switch (cable)
  • Several WiFi devices including smart home devices
  • Pi-Hole
  • Mac Mini as a linux Server (cable)
  • Synology NAS (cable)
  • AVM repeater

Before i start my own extensive research, may you recommend me a Router for my setup?

Thank you in advance :-)

  • leanleft@lemmy.mlEnglish
    01·
    10 months ago

    a router that supports openwrt. relatively new, affordable, good specs/features. non-bs model.

    or a computer with NIC that supports AP mode.(if u know how to do that)

  • TCB13@lemmy.worldEnglish
    1·
    11 months ago

    How much wifi and open-source do you really want?

    If you are willing to go with commercial hardware + open source firmware (OpenWRT) you might want to check the table of hardware of OpenWrt at https://openwrt.org/toh/views/toh_available_16128_ax-wifi and https://openwrt.org/toh/views/toh_available_864_ac-wifi. One solid pick for the future might be the Netgear WAX2* line or the GL.iNet GL-MT6000. One of those models is now fully supported the others are on the way. If you don’t mind having older wifi a Netgear R7800 is solid.

    For a full open-source hardware and software experience you need a more exotic brand like this https://www.banana-pi.org/en/bananapi-router/. The BananaPi BPi R3 and here is a very good option with a 4 core CPU, 2GB of RAM Wifi6 and two 2.5G SFP ports besides the 4 ethernet ports. There’s also an upcoming board the BPI-R4 with optional Wifi 7 and 10G SPF.

    Both solutions will lead to OpenWRT when it comes to software, it is better than any commercial firmware but there’s a catch about open-source wifi. The best performing wifi chips are Broadcom and those don’t usually see open-source software support**. MediaTek is the open-source alternative and while they work fine they can’t, unfortunately, beat Broadcom. As most hardware is Broadcom they have hacks that go behind the published wifi standards and get it go a few megabytes/second faster and/or improve the range a bit.

    DD-WRT is another “open-source” firmware that has a specific agreement with Broadcom to allow them to use their proprietary drivers and distribute them as blob with their firmware. While it works don’t expect compatibility with newer hardware nor a bug free solution like OpenWRT is.

    Side note: while there are things like OPNsense and pfSense that may make sense in some cases you most likely don’t require that. You’ve a small network and OpenWRT will provide you with a much cleaner open-source experience and also allow for all the customization you would like. Another great advantage of OpenWRT is that with a great router like the BananaPi BPi R3 you’ve the ability to install 3rd party stuff in your router, you may even use qemu to virtualize stuff like your Pi-Hole on it or simply run docker containers.

    • Possibly linux@lemmy.zipEnglish
      0·
      11 months ago

      I don’t think openwrt will ever be bug free. Stable yes but bug free no. Additionally I’m not sure why you think Broadcom has the best performance. There are plenty of devices out there and they don’t need to be Broadcom to be good.

      • TCB13@lemmy.worldEnglish
        1·
        11 months ago

        Stable yes but bug free no

        Is any software really bug free? Most likely not, but compared to DD-WRT it is bug free. :P

        Additionally I’m not sure why you think Broadcom has the best performance. There are plenty of devices out there and they don’t need to be Broadcom to be good.

        Because Broadcom doesn’t play fair, they have hacks that go behind the published WIFI standards and get it go a few megabytes/second faster and/or improve the range a bit. And to take advantage of those feature both your AP and client must be Broadcom.

        Not saying that MediaTek isn’t good, because it is, I use a ton of MediaTek devices and they’re all great.

    • Ohh@lemmy.mlEnglish
      0·
      11 months ago

      I (not op) have a 100 mbps connection. That’s not very fast. Would i even benefit from such a router? I currently have 2 x asus RT-AC88U but the mesh functionality is not great. I have brig walls. The way i understand it, for my needs, wiring is the only way to go?

      • captainsiscold@kbin.social
        2·
        11 months ago

        I’m admittedly not much of a networking expert, but you might be able to improve your existing network by running Ethernet backhaul for your mesh network (assuming your access points support it).

        Regarding whether you would benefit from a router like that: I’ve only got a 25Mbps connection, so my main use case for it is using ZeroTier to access various services on my local network, more advanced firewall controls, and the dual 2.5G Ethernet ports for connection between my main PC and home server.

  • Decronym@lemmy.decronym.xyzBEnglish
    1·
    11 months ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    AP WiFi Access Point
    NAT Network Address Translation
    Unifi Ubiquiti WiFi hardware brand

    3 acronyms in this thread; the most compressed thread commented on today has 13 acronyms.

    [Thread #487 for this sub, first seen 5th Feb 2024, 16:45] [FAQ] [Full list] [Contact] [Source code]