South Korea is beginning the mass production of a low-cost laser weapon that has successfully shot down small drones during testing, the country’s key arms agency said Thursday.

The laser weapon, called Block-I, “can precisely strike small unmanned aerial vehicles and multicopters at close range,” a news release from South Korea’s Defense Acquisition Program Administration (DAPA) said.

The release did not give a cost for the weapon, but said each shot fired would only cost about $1.50.

Imagery supplied by the agency appears to show a weapon around the size of a shipping container with a laser mounted on top and what appears to be a radar or tracking device mounted on one side of the platform.

  • circuscritic@lemmy.ca
    link
    fedilink
    English
    arrow-up
    42
    arrow-down
    4
    ·
    5 months ago

    There is no doubt that lasers will play a bigger and bigger role in combat systems, especially in a layered air defense networks.

    But it’s dishonest how these articles only cite the cost of electricity. It would be like citing the cost of a single shell of artillery to imply that is the only expenditure when the system is used.

    Just like a Howitzer, the parts on lasers experience wear and tear, but to replace them cost a hell of a lot more than a new barrel.

    Yes, in the long-term lasers will be more cost-effective than ground to air missile interceptors*, but any reporting that is clearly trying to make an argument for cost savings, should have the integrity to get figures that factor in battlefield maintenance of those systems.

    *When applicable. Lasers will not remove the need for any existing systems, but will provide a cost savings by providing additional options for the air defense system’s operators.

    • Tja@programming.dev
      link
      fedilink
      English
      arrow-up
      8
      ·
      5 months ago

      Usually they do quote the cost per shell, not including rifle wear, she’ll transport, oder wages, etc. Or missile, in case of patriot systems.

      • circuscritic@lemmy.ca
        link
        fedilink
        English
        arrow-up
        12
        arrow-down
        2
        ·
        5 months ago

        The cost per round is a lot more than just power generation when talking about lasers.

        The wear on tear on lasers is a lot different than other systems and when the case is being made for their cost effectiveness they need to be factored in, instead of the highly misleading figures that only prices out electricity.

        • CanadaPlus@lemmy.sdf.org
          link
          fedilink
          English
          arrow-up
          7
          ·
          edit-2
          5 months ago

          What kind of wear are we talking about? Some of the laser types I can think of don’t seem like they would need to wear out.

          • KillingTimeItself@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            7
            arrow-down
            1
            ·
            5 months ago

            it’s not just the laser…

            It’s the optics, it’s the cooling, it’s the physical mechanics it’s built on, the laser may be pushed well over it’s designed target range causing it to breakdown further.

            The power supply for the laser, the circuitry for control (to some degree) and most importantly, where ever you source that energy from. Presumably a super cap bank and a generator? Maybe batteries? Who knows.

            • Batman@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              5 months ago

              Worked at a spring factory, a laser manufacturer bought copper springs by the boat load because they’d melt I guess

              • KillingTimeItself@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                1
                ·
                5 months ago

                i would assume they used them in a heat sinking deal. Presumably to apply pressure to a diode package into a heatsink, while sinking heat, or something along those lines. Could be galvanic corrosion reasons also i guess.

            • CanadaPlus@lemmy.sdf.org
              link
              fedilink
              English
              arrow-up
              2
              arrow-down
              1
              ·
              edit-2
              5 months ago

              The mount would wear out, that’s true. As would the cooling pump, although I don’t see why you wouldn’t just use a cheap one off the shelf. The rest doesn’t theoretically need to wear if you make sure you have enough thermal allowances.

              • KillingTimeItself@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                1
                ·
                5 months ago

                yeah pretty much, optics would likely be pretty temperamental at those power levels, but maybe they aren’t using any? Idk.

                If a bug lands on one while it fires would basically melt the optics instantly. I would imagine.

                • CanadaPlus@lemmy.sdf.org
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  5 months ago

                  Oh yeah, there’s that. Ideally you’d want semi-disposable covers of some kind.

                  How powerful is this thing, anyway? I’m assuming it’s more of an “overheat” than “vapourise” situation.

                  • KillingTimeItself@lemmy.dbzer0.com
                    link
                    fedilink
                    English
                    arrow-up
                    1
                    ·
                    5 months ago

                    if it’s powerful enough to yeet drones out of the sky, and hasn’t been built before, we’re talking KW range power rating, enough to presumably vaporize parts of the drone instantly, or near instantaneously. So presumably dirty optics would be a big problem. We already have problems with optics on flashlights getting “dirty” from similar issues.

      • CanadaPlus@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        5 months ago

        Even in the very long term, loss of equipment to enemy fire is non-negligible during active combat, so you need to tack on the purchase cost in some manner.

        In the shorter term you have to buy a 30 million dollar laser system, even if you’ll eventually make it back.