Yes, some of their firmware updates started breaking aftermarket toner cartridges and support said “that sucks” like it was very intentional. It seems constrained to a few of the MFC color models more than anything tho I’ve never had any issues other than bad wifi modules in the b&w home office lasers. Which if you’re using wifi on a printer that’s your own damn fault lol
Yeah I’m not sure whether this is shenanigans or an actual problem Brother is managing here. The post does mention there are problems with incorrect response to temperature management with the unoriginal cartridge, which again could theoretically cause harm.
I honestly wasn’t aware unoriginal cartridges were a thing for Brother printers, since the originals tend to be quite reasonable.
But to continue using the unoriginal cartridges he can as the answer states, use BRAdmin to downgrade the firmware.
So it’s not like Brother is attempting to take control of your printer like HP likes to do.
I’m sure HP didn’t ramp up their bullshit from 0 to 11 overnight, the question now is how much we can trust Brother not to be walking the same path and mandating more and more restrictive firmwares in the future. I think them opensourcing drivers and firmwares would help mitigate that, and if their business model is really to be that sole good guy and antagonize the likes of HP/Epson/… they don’t have anything to lose and a lot to win (or as a minimum, myself as a customer).
HP has done the ink cartridge shenanigans for more than 30 years now. They just recently found a new trick. Apart from that nothing has really changed.
I am not aware Brother ever did similar things to basically trick or cheat their customers. Most other vendors are somewhere in between. AFAIK none are as bad as HP.
My dad is running his Brother HL-1212W printer on the open source Linux driver, works perfectly fine, and I was actually surprised about the high quality of his prints for such a cheap printer.
AFAIK Brother is among the best regarding opensource drivers too.
All this printer talk almost makes me want to buy a new printer. My current printer is a 14 year old Samsung color laser, and the print quality is not that stellar anymore. ;) The Samsung open source driver kind of suck for this printer. There isn’t even a driver for this specific model CLP-325W, so I have to choose another Samsung printer that is (mostly) compatible.
The Brother printer was completely plug and play. The system recognized the printer, and installed the correct open source driver, no hassle at all.
Eh, I am all about wired networking wherever I can, but my awesome old Brother laser printer gets used like once per month or two, and it lives off in a far corner of the house where it isn’t taking up valuable space. Plus it could work with a tiny fraction of the LAN bandwidth available to it.
On wi-fi it stays, lol. I think I may have had to reconnect it once in the decade+ we’ve had it. Otherwise, the printout is ready before I can even walk to the printer (unless it has a ton of pages, naturally).
I don’t even know how old it is at this point. I just know it’s over a decade because I didn’t buy a third party toner cartridge until 2014.
Yes, some of their firmware updates started breaking aftermarket toner cartridges and support said “that sucks” like it was very intentional. It seems constrained to a few of the MFC color models more than anything tho I’ve never had any issues other than bad wifi modules in the b&w home office lasers. Which if you’re using wifi on a printer that’s your own damn fault lol
Yeah I’m not sure whether this is shenanigans or an actual problem Brother is managing here. The post does mention there are problems with incorrect response to temperature management with the unoriginal cartridge, which again could theoretically cause harm.
I honestly wasn’t aware unoriginal cartridges were a thing for Brother printers, since the originals tend to be quite reasonable.
But to continue using the unoriginal cartridges he can as the answer states, use BRAdmin to downgrade the firmware.
So it’s not like Brother is attempting to take control of your printer like HP likes to do.
I’m sure HP didn’t ramp up their bullshit from 0 to 11 overnight, the question now is how much we can trust Brother not to be walking the same path and mandating more and more restrictive firmwares in the future. I think them opensourcing drivers and firmwares would help mitigate that, and if their business model is really to be that sole good guy and antagonize the likes of HP/Epson/… they don’t have anything to lose and a lot to win (or as a minimum, myself as a customer).
HP has done the ink cartridge shenanigans for more than 30 years now. They just recently found a new trick. Apart from that nothing has really changed.
I am not aware Brother ever did similar things to basically trick or cheat their customers. Most other vendors are somewhere in between. AFAIK none are as bad as HP.
My dad is running his Brother HL-1212W printer on the open source Linux driver, works perfectly fine, and I was actually surprised about the high quality of his prints for such a cheap printer.
AFAIK Brother is among the best regarding opensource drivers too.
All this printer talk almost makes me want to buy a new printer. My current printer is a 14 year old Samsung color laser, and the print quality is not that stellar anymore. ;) The Samsung open source driver kind of suck for this printer. There isn’t even a driver for this specific model CLP-325W, so I have to choose another Samsung printer that is (mostly) compatible.
The Brother printer was completely plug and play. The system recognized the printer, and installed the correct open source driver, no hassle at all.
Eh, I am all about wired networking wherever I can, but my awesome old Brother laser printer gets used like once per month or two, and it lives off in a far corner of the house where it isn’t taking up valuable space. Plus it could work with a tiny fraction of the LAN bandwidth available to it.
On wi-fi it stays, lol. I think I may have had to reconnect it once in the decade+ we’ve had it. Otherwise, the printout is ready before I can even walk to the printer (unless it has a ton of pages, naturally).
I don’t even know how old it is at this point. I just know it’s over a decade because I didn’t buy a third party toner cartridge until 2014.
Can you avoid firmware updates? Are there domains that need to be blocked to prevent them?
Yes the firmware updates are only voluntary. The driver will sure nag you to do them but you can choose when and what version easily.